Industrial Waste Incinerator

INDUSTRIAL INCINERATOR
Incineration uses combustion to make infectious industrial waste harmless and reduce thewaste mass and volume by more than 90 percent. Proper incineration can convert certainwastes into gases and incombustible solid residues (e.g., ash) that are relatively harmless. Adual-chamber incinerator operated within the optimal temperature range of 850° to 1200°Cresults in a lower level of emissions. The gases from incineration are released into theatmosphere (with or without gas cleaning). Residue ash from proper incineration can beencapsulated in designated ash pits or controlled landfills without any major risk. However,when the conditions are not adequate—for example, when the waste is not properly segregatedor the incinerator is not properly constructed or operated—toxic compounds can be found inthe unburned waste, and harmful gases can be released into the atmosphere. Good planning,technical oversight, and sustained supportive supervision of incinerator systems are critical toensuring safe incineration. Waste incineration plants is operated in such a way as to achieve alevel of incineration such that the total organic carbon content of slag and bottom ashes is lessthan 3% or their loss on ignition is less than 5% of the dry weight of the material.
INDUSTRIAL INCINERATOR
FUEL OPTIONS

• Diesel
• LPG
• Electrical

TEMPERATURES
Main chamber: 750°C – can reach in excess of 1000°C*Secondary chamber: 850°C – 1100°C*
BURNERS
Fully automatic, high-efficiency burners with electronic ignition, flame recognition andcombustion control devices fitted.
CONSTRUCTIONSteel welded fabrication consisting of sheet steel and structural section supports.
AVAILABLE LOADING CAPACITY: 100/200/250/500/1000/1500/2000 Kg/day** Note:-The content of the product and specification are subject to change without prior notice for continuos improvement